English

|

Chinese
\
LOTO PC oscilloscope OSC2002.PDF  
PC oscilloscope OSC2002 is the latest model of OSC series, with bandwidth 50 MHz and sampling rate 1 GS/s,  OSC2002 is a competitive model among entry level oscilloscopes. More than a scope, the osc2002 could be logic analyzer when additional function module is plugged in through the expansion interface.

\

Product Features
  •  Highest sampling rate 1  GS/s (equivalent sampling)
  •  Recommended input sine wave frequency range 1~50 MHz
  •  Memory depth 64K~2M per channel
  •  Input voltage range (-5V~+5v) / (-50V~+50v)
  •  2 channel input
  •  USB2.0 interface, USB  power supply
  •  Support for Win XP ~ Win 10
  •  Hardware trigger
  •  Decoding: UART/RS-232, I²C
  •  Hardware trigger can be used as a 2-channels data logger continuously up to 72-hours
\
 
Specification
Model OSC2002
Connector type : 2 channels with BNC sockets, 20 mm spacing.
Vertical resolution: 8 Bit.
Maximum sampling rate (S/s): 1 G
Bandwidth ( −3 dB): 50 MHz
Input coupling: AC/DC.
Input characteristics: 1MΩ || 25pF.
PC OS requirements: Windows XP, Win 7, Win 8.1, Win10 (32 bit and 64 bit).
Over voltage protection: ±60.0v (x1), ±600.0v (x10). (DC + AC peak)
Triggering type: Rising/falling edge according to trigger level.
Triggering mode: None, auto, normal, single.
Pre-trigger capture: 50% of capture size.
Automatic measurements: Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value.
Samples Interpolation: Linear or sin(x)/x.
FFT: 1024 points.
FFT window function: Rectangle, Hanning, Hamming, Blackman.
Math: A+B, A-B, AxB, X-Y.
Acquisition Modes: High Resolution mode / Peak-detect mode.
Waveform recording and playback: File format : *.oscxxx.
Record depth: 50 ~ 450 frames.
File size: 6 MB ~ 20GB.
Data logger Sampling Interval: 1 second to 1 hour.
Data logger Record Duration: 1 minute ~ 72 hours.
Temperature range: Operating: 0 °C to 40 °C (20 °C to 30 °C for stated accuracy). Storage: −20 °C to +60 °C.
Reference Output: 1K Hz, 1.5 V square wave output with 50% duty cycle.
Size: 153(L) x 93(W) x 23(H) mm.
Languages (full support): English, Chinese (simplified).
Compliance: CE, FCC.

Model OSC2002
Net weight: 210 g.
Input sensitivity (10 vertical divisions): 50 mV/div to 2 V/div.
Input ranges (probe x1): ±250 mV to ±5 V full scale, in 6 ranges.
Timebase selection (10 horizontal divisions): 5 ns/div ~ 2 s/div, in 21 ranges.

 Typical noise
(peak to peak voltage):
20 mv/div /
50 mv/div 5.8 mv
100 mv/div 8 mv
200 mv/div 22 mv
500 mv/div 38.8 mv
1 v/div 88.2 mv
GPIO: 3 I/O
Memory depth
((byte /ch):
64K ≤100 ms/div
258k ≤200 ms/div
645k ≤500 ms/div
1M ≤1s/div
2M ≤2ms/div
Trigger type: Hardware
Trigger source: Channel A
Power consumption: 5 v || (248~279) mA
Protocols decoding: UART/RS-232, I²C

 
Accessory
  •  OSC2002 equipment 1 set
  •  USB printed cable(Port A to Port B)1 piece
  •  Probe for Oscilloscope 2  pieces

Contact
Oscilloscope Dept
  • E-mail: bin.qiu@rockemb.com
  • Phone: +86 13109550135, (9AM to 11PM,GMT+08:00)
  • Skype: bin.qiu@rockemb.com,  live:173393190
\
Recommended for you